Difference between revisions of "AP: Year End"

From GivenHansco Keystone Help
Jump to navigation Jump to search
Line 115: Line 115:
  
 
===About the Payments From options===
 
===About the Payments From options===
'''Previous Year''':  This is the most common method.  All payments for the year are recorded in the "YTD Payments" field in the Vendor record.  When Year End Processing is run these roll into "Last Year Payments".
+
:'''Previous Year''':  This is the most common method.  All payments for the year are recorded in the "YTD Payments" field in the Vendor record.  When Year End Processing is run these roll into "Last Year Payments".
'''Current Year''': This will print 1099s from the '''YTD Payments''' field.  This only works if you print 1099s right after the year ends and have no new activity.  Timing becomes quite tricky.
+
:'''Current Year''': This will print 1099s from the '''YTD Payments''' field.  This only works if you print 1099s right after the year ends and have no new activity.  Timing becomes quite tricky.
'''Transaction Detail''':  This takes advantage of the capability in invoice vouchering to record the 1099 class for each transaction with a vendor.  For example you could mark just the interest portion of note payments for the 1099-Int.  For 2021 this has way to activity distinguish by state.
+
:'''Transaction Detail''':  This takes advantage of the capability in invoice vouchering to record the 1099 class for each transaction with a vendor.  For example you could mark just the interest portion of note payments for the 1099-Int.  For 2021 this has way to activity distinguish by state.
 
 
Starting with 2021 Year End, the values on the '''1099 Amounts''' tab in vendor maintenance take priority over the above selection.
 
  
 
==Processing Web Services 1099s==
 
==Processing Web Services 1099s==

Revision as of 13:14, 23 December 2021


2021 Year End

Keystone provides the ability to print the 1099-NEC form, along with the 1099-MISC and 1099-INT. For this year you will choose either the Traditional or the Web Services Process.

Traditional Process

Keystone can print 1099s directly for Federal 1099s when...

  • Only one box number per form
  • No State 1099s are required
  • No E-FILE is required.

Web Services Process

Starting this year, E-Filing and several new features are available when printing and E-Filing with our 3rd party partner NELCO. You must use this process if...

You may also choose this process for the convenience of having a 3rd party print and mail your forms. See: Web Services Pricing Information

Year end processing

Setup Periods for the new year

  1. Select “Setup Periods” from the Accounts Payable Month End menu.
  2. Enter “2022” in the Year box and hit “tab”
  3. Follow the prompts to fill in the 12 calendar months automatically.
  4. Click OK or press F2 when done.

APSetPdsNewYr.PNG

Close Old Year (also see Setup Periods)

APSetPdsOldYr.PNG

  1. Select “Setup Periods” from the Accounts Payable Month End menu.
  2. Enter “2021” in the Year box and hit “tab”
  3. Mark the Status “C” for Closed

Run Year End Processing

  1. Open Month/Year End Processing from the Month/Year End menu of Accounts Payable
  2. Enter Month and Year
  3. Click OK
    APYrEnd.PNG
  4. When prompted to backup optionally Click YES to proceed.

Note: Running Year End Processing recalculates Year to Date Purchases and Payments for the new and prior year. If you make transactions into AP after running Year End Processing, run the process again.

Processing 1099s

Preparation

Set up 1099 States (Web Services Process Only)

1099 State Code Maintenance (new for 2021) is used when...

  • State 1099s are required
  • Federal 1099s with multiple boxes are used. (NOTE: This code is automatically created by Keystone)

For each state enter...

  • Description
  • State ID No.
  • Sequence - Your home state typically comes first.

Set Tax Information for Vendors

Review vendors using AP Vendor Maintenance.

  • Modify the Name and 1099 Name to handle dba vendors. Only fill in the 1099 name as needed.
On the new Taxes Tab...
  • Verify 1099 Classes are setup properly. If necessary setup new 1099 classes in 1099 Class Maintenance
  • Verify Tax ID No.
  • Set the Type of TIN ***New for 2021!!!*** Required if you are using Web Services.
  • Set the Tax ID Type. NOTE: the Tax ID Types changed for 2011. This is used for W9 and not for 1099s.
  • Use AP Vendor Maintenance to setup the 1099 address where needed. (Only use this when the 1099 address is different than the standard address. These fields hold larger values than the standard address.)

Adjust 1099 Amounts for Vendors (Web Service Process)

***New for 2021*** Both state and multi-box federal amounts are configured on the new "1099 Amounts" tab in AP Vendor Maintenance. Skip this section if yow want to rely on traditional 1099 method of reporting the Previous Year, Current Year or Transaction Amounts from the main Vendor record.

State Amounts

Make sure 1099 States are configured (from a/p file maintenance menu).

On the 1099 Amounts tab, for each state and 1099 Class that apply to the vendor enter the:

  • Tax Year
  • 1099 Class (e.g. 1099-INT)
  • State
  • State Income
  • State Tax (where applicable)

Federal 1099 Amounts

This is typically used for Federal 1099s with values in multiple boxes. Do not set this up if you want to rely on Previous Year or Current Year balance for the Vendor.

In this case, separate 1099 classes should be already configured to represent each box that could print on a 1099 form.

When entering amounts on the tab for Federal use "00" as the State ID. Add one line for each box with the appropriate 1099 class and amounts. APVen1099Amts.PNG

NOTES:

  • When Federal Amount is entered, it will override the "traditional" values (e.g. "Prior Year Summary").
  • Any amount entered will trigger a 1099 to print even if it's under the "Minimum Amount for Federal 1099"

Steps to Printing 1099s - Traditional Method

This is the traditional method of printing your own 1099s. You can use this option when...

  • No E-File
  • No State 1099s
  • Only one box per 1099 form.


  1. Verify that all preparation is complete and the Year End Processing has been completed.
  2. Print 1099 Audit List from the Month End menu of Accounts Payable
    note: Select Include Non-1099 Vendors and preview to check for vendors who may need to be setup for 1099s.
    Ap1099 p2.png
  3. Select Print 1099 Forms
    1. Select the Form to be Printed
      AP1099 P1.png
    2. Select run with Prior Year or Transaction Detail option.
    3. Optionally Select the appropriate 1099 Class
    4. Click Payer Info tab to set up company name and address.
    5. Select Include Inactive as well as Include Active.

About the Payments From options

Previous Year: This is the most common method. All payments for the year are recorded in the "YTD Payments" field in the Vendor record. When Year End Processing is run these roll into "Last Year Payments".
Current Year: This will print 1099s from the YTD Payments field. This only works if you print 1099s right after the year ends and have no new activity. Timing becomes quite tricky.
Transaction Detail: This takes advantage of the capability in invoice vouchering to record the 1099 class for each transaction with a vendor. For example you could mark just the interest portion of note payments for the 1099-Int. For 2021 this has way to activity distinguish by state.

Processing Web Services 1099s

New for 2021, Use Web Services option for E-Filing, State and Multiple boxes on single 1099 form. Instructions are developing. If you plan to process 1099s with Web Services before all instructions are complete, please contact GivenHansco support.

Use must this option if...

  • Processing State 1099s
  • E-Filing Federal 1099s
  • Processing Federal 1099s with multiple boxes on a single form.

AP Web Portal Menu.PNG

  1. Select Federal & State 1099 Export from the Web Portal Export/Filing menu
    APWebEfile.PNG
    1. Verify Year is 2021
    2. Set Min. Amount for Federal 1099
    3. Select Payments From option
    4. Setup information on Company Info Tab
      1. Name/Address City/State/Zip
      2. Email
      3. Federl ID Number
      4. Iowa E-File Number
      5. Payer RTN
    5. Select Export
    6. Review report for accuracy
    7. Continue to Export. NOTE: Select a file location that will be easy to find for the Web Portal Upload.
  2. Upload To Web Portal
  3. Web Portal Dashboard



Preparing for 2022

  • verify W-9 Tax Types
  • verify TIN types.
  • Set Default 1099 State Code - This will be the default used for 1099 vouchering detail for 2022.
  • When vouchering invoices - you may choose to enter the appropriate 1099 Type along with the 1099 state. This will provide data you can use for next year's 1099s.
  • Keep up to date on new rules. Prepare for 1099s going to all corporations.