Difference between revisions of "AP: Year End"

From GivenHansco Keystone Help
Jump to navigation Jump to search
Line 41: Line 41:
 
==Preparation==
 
==Preparation==
  
===Set up 1099 States (Web Services Process Only)===
+
===Set up 1099 States ===
 
[[1099 State Code Maintenance]] is used when...
 
[[1099 State Code Maintenance]] is used when...
 
*State 1099s are required
 
*State 1099s are required
Line 62: Line 62:
 
:*Use [[AP Vendor Maintenance]] to setup the 1099 address where needed.  (Only use this when the 1099 address is different than the standard address.  These fields hold larger values than the standard address.)
 
:*Use [[AP Vendor Maintenance]] to setup the 1099 address where needed.  (Only use this when the 1099 address is different than the standard address.  These fields hold larger values than the standard address.)
  
===Adjust 1099 Amounts for Vendors (Web Service Process)===
+
===Adjust 1099 Amounts for Vendors ===
Both state and multi-box federal amounts are configured on the new "1099 Amounts" tab in [[AP Vendor Maintenance]].  Skip this section if yow want to rely on traditional 1099 method of reporting the Previous Year, Current Year or Transaction Amounts from the main Vendor record.
+
Both state and multi-box federal amounts are configured on the new "1099 Amounts" tab in [[AP Vendor Maintenance]].  Skip this section if you want to rely on traditional 1099 method of reporting the Previous Year, Current Year or Transaction Amounts from the main Vendor record.
  
 
====State Amounts====
 
====State Amounts====
Make sure 1099 States are configured (from a/p file maintenance menu).
+
Make sure 1099 States are configured (from A/P File Maintenance menu).
  
 
On the 1099 Amounts tab, for each state and 1099 Class that apply to the vendor enter the:
 
On the 1099 Amounts tab, for each state and 1099 Class that apply to the vendor enter the:
Line 84: Line 84:
 
[[File:APVen1099Amts.PNG]]
 
[[File:APVen1099Amts.PNG]]
  
'''NOTES:'''  When using Web Process...
+
'''NOTES:'''   
 
*Any Federal Amount entered will trigger a 1099 to print even if it's less than the "Minimum Amount for Federal 1099"
 
*Any Federal Amount entered will trigger a 1099 to print even if it's less than the "Minimum Amount for Federal 1099"
 
*When Federal Amount is entered for a 1099 class, it will override the "traditional" value for that class (e.g. "Prior Year Summary").
 
*When Federal Amount is entered for a 1099 class, it will override the "traditional" value for that class (e.g. "Prior Year Summary").

Revision as of 18:07, 6 December 2023


2023 Year End

UPDATED 12/6/2023

Keystone provides the ability to print 1099-INT, 1099-MISC and 1099-NEC forms using the Web Services Process.

This process is performed via our 3rd party partner Nelco. See: Web Services Pricing Information

Year end processing

Setup Periods for the new year

APSetPdsNewYr.PNG

  1. Select “Setup Periods” from the Accounts Payable Month End menu.
  2. Enter “2023” in the Year box and hit “tab”
  3. Follow the prompts to fill in the 12 calendar months automatically.
  4. Click OK or press F2 when done.


Close Old Year (also see Setup Periods)

APSetPdsOldYr.PNG

  1. Select “Setup Periods” from the Accounts Payable Month End menu.
  2. Enter “2023” in the Year box and hit “tab”
  3. Mark the Status “C” for Closed


Run Year End Processing

APYrEnd.PNG

  1. Open Month/Year End Processing from the Month/Year End menu of Accounts Payable
  2. Enter Month and Year
  3. Click OK
  4. When prompted to backup optionally Click YES to proceed.

Note: Running Year End Processing recalculates Year to Date Purchases and Payments for the new and prior year. If you make transactions into AP after running Year End Processing, run the process again.

Processing 1099s

Preparation

Set up 1099 States

1099 State Code Maintenance is used when...

  • State 1099s are required
  • Federal 1099s with multiple boxes are used. (NOTE: This code is automatically created by Keystone)

For each state enter...

  • Description
  • State ID No.
  • Sequence - Your home state typically comes first.

Set Tax Information for Vendors

Review vendors using AP Vendor Maintenance.

  • Verify the Name. Set 1099 Name to the official name for tax reporting to handle dba vendors - Only if needed.
On the new Taxes Tab...
  • Verify 1099 Classes are setup properly. If necessary setup new 1099 classes in 1099 Class Maintenance
  • Verify Tax ID No.
  • Set the Type of TIN Required if you are using Web Services.
  • Set the Tax ID Type. This is used for W9 and not for 1099s.
  • Set Account No.
  • Use AP Vendor Maintenance to setup the 1099 address where needed. (Only use this when the 1099 address is different than the standard address. These fields hold larger values than the standard address.)

Adjust 1099 Amounts for Vendors

Both state and multi-box federal amounts are configured on the new "1099 Amounts" tab in AP Vendor Maintenance. Skip this section if you want to rely on traditional 1099 method of reporting the Previous Year, Current Year or Transaction Amounts from the main Vendor record.

State Amounts

Make sure 1099 States are configured (from A/P File Maintenance menu).

On the 1099 Amounts tab, for each state and 1099 Class that apply to the vendor enter the:

  • Tax Year
  • 1099 Class (e.g. 1099-INT)
  • State
  • State Income
  • State Tax (where applicable)

Federal 1099 Amounts

This is typically used for Federal 1099s with values in multiple boxes. Do not set this up if you want to rely on Previous Year or Current Year balance for the Vendor.

In this case, separate 1099 classes should be already configured to represent each box that could print on a 1099 form.

When entering amounts on the tab for Federal use "00" as the State ID. Add one line for each box with the appropriate 1099 class and amounts.

APVen1099Amts.PNG

NOTES:

  • Any Federal Amount entered will trigger a 1099 to print even if it's less than the "Minimum Amount for Federal 1099"
  • When Federal Amount is entered for a 1099 class, it will override the "traditional" value for that class (e.g. "Prior Year Summary").
  • Entering 0 for Federal Amount for a 1099 class will cause that class to be skipped, even if a value exist based on the "traditional" value.

Steps to Printing 1099s - Traditional Method

This is the traditional method of printing your own 1099s. You can use this option when...

  • No E-File
  • No State 1099s
  • Only one box per 1099 form.


  1. Verify that all preparation is complete and the Year End Processing has been completed.
  2. Print 1099 Audit List from the Month End menu of Accounts Payable
    note: Select Include Non-1099 Vendors and preview to check for vendors who may need to be setup for 1099s.
    Ap1099 p2.png
  3. Select Print 1099 Forms
    1. Select the Form to be Printed
      AP1099 P1.png
    2. Select run with Prior Year or Transaction Detail option.
    3. Optionally Select the appropriate 1099 Class
    4. Click Payer Info tab to set up company name and address.
    5. Select Include Inactive as well as Include Active.

About the Payments From options

Previous Year: This is the most common method. All payments for the year are recorded in the "YTD Payments" field in the Vendor record. When Year End Processing is run these roll into "Last Year Payments".
Current Year: This will print 1099s from the YTD Payments field. This only works if you print 1099s right after the year ends and have no new activity. Timing becomes quite tricky.
Transaction Detail: This takes advantage of the capability in invoice vouchering to record the 1099 class for each transaction with a vendor. For example you could mark just the interest portion of note payments for the 1099-Int. This provides way to distinguish activity by state.

Processing Web Services 1099s

Use Web Services option for E-Filing, State and Multiple boxes on single 1099 form. Instructions are developing. If you plan to process 1099s with Web Services before all instructions are complete, please contact GivenHansco support.

Use must this option if...

  • Processing State 1099s
  • E-Filing Federal 1099s
  • Processing Federal 1099s with multiple boxes on a single form.

AP Web Portal Menu.PNG

  1. Select Federal & State 1099 Export from the Web Portal Export/Filing menu
    APWebEfile.PNG
    1. Verify Year is 2023
    2. Set Min. Amount for Federal 1099
    3. Select Payments From option
    4. Setup information on Company Info Tab
      1. Name/Address City/State/Zip
      2. Email
      3. Federl ID Number
      4. Iowa E-File Number
      5. Payer RTN
    5. Select Export
    6. Review report for accuracy
    7. Continue to Export. NOTE: Select a file location that will be easy to find for the Web Portal Upload.
  2. Upload To Web Portal
  3. Web Portal Dashboard


Preparing for 2024

  • verify W-9 Tax Types
  • verify TIN types.
  • Set Default 1099 State Code - This will be the default used for 1099 vouchering detail for 2024.
  • When using Invoice Vouchering - you may choose to enter the appropriate 1099 Type along with the 1099 state. This will provide data you can use for next year's 1099s.
  • Keep up to date on new rules. Prepare for 1099s going to all corporations.